home *** CD-ROM | disk | FTP | other *** search
- 1 Start playing
- 2 Pause / Resume
- 3 Stop
- 4 One track forward
- 5 One track backward
- 6 Eject CD
- 7 Rescan CD
- 8 Overread defect sectors
- 9 Save subsequent tracks in one file
- 10 Save file(s) in WAV-format
- 11 Save file(s) in AU-format
- 12 Save file(s) in RAW-format
- 13 Right mouse button to select an excerption
- 14 Mark begin
- 15 Mark end
- 16 Save title found in CDPLAYER.INI or CDDB - file
- 17 Start copying
- 18 Buffered reading when using generic interface
- 19 Save file(s) in MPG (MPEG 1 Layer 2) format. Available through built in routines and Xing MPEG Encoder
- 20 Select / deselect whole CD
- 21 Do jitter correction during reading, buffered reading implied.
- 22 Save file(s) in MP3 (MPEG 1 Layer 3) format. Available through MP3Compressor, L3enc, Xing MPEG Encoder or TOMPG
- 23 Enter the CDDB servername
- 25 Enter your username
- 26 Retrieve CD-information over internet (CDDB database)
- 27 Retrieve CD-information through CDDB file(s)
- 28 Enter the name of the artist
- 29 Enter the title of the CD
- 30 The titles of the CD
- 31 Enter the title of the track
- 32 Submit the CD information to the CD-database
- 33 Save title
- 34 Choose a category
- 35 Enter the mailserver name
- 36 Save tracknumber with title found in CDPLAYER.INI / CDDB file
- 37 Save file(s) in WAV- (MPEG 1 Layer 3) format. Available through L3CODEC of the Fraunhofer Institut.
- 38 Save artist found in CDCPLAYER.INI or CDDB-file
- 39 Write MP3-ID tag information for each saved file
- 40 Choose the music category
- 41 Enter a free comment
- 42 Enter the production year of the CD
- 43 Use L3ENC for MP3 (MPEG 1 Layer 3) encoding
- 44 Select several files to submit to CDDB
- 45 Supress the writing of sectors only filled with the value 0
- 46 Select a host adapter
- 47 Select a LUN
- 48 Select a SCSI device
- 49 Use http-protocol to access the CDDB-database. If not checked the CDDB protocol is used
- 50 Enter a path for the cddb-http-access
- 51 Use quick-mode for MP3-Compression
- 52 Using powermode speeds up reading for some drives
- 53 # of readbuffers used for buffered reading
- 54 # of jitterbuffers used for jitter correction
- 55 Reading speed - 0 means defaultspeed of the drive
- 56 Enter the path for the MP3-Compressor / l3enc
- 57 Enter a defaultpath for the file(s) to save
- 58 Enter a path for the CDDB-files
- 59 Force the use of the generic interface (only Windows-NT)
- 60 Save the albumname if available
- 61 Save tracktime
- 62 Use the Xing MPEG Encoder to produce MPG, MP3 or MPA format
- 63 Use ATAPI interface to access drive
- 64 Enter the name of the proxyserver. Use "http://" prefix for the normal servername!
- 65 MPEG 2 Layer 3 only availabe with Xing MPEG Encoder
- 66 Enter the path for the local CD database
- 67 Use local CD database
- 68 Alternate mode for Toshiba drives
- 69 Cancel write operation
- 70 Change toolbar button size
- 71 Alternate mode for Matsushita drives
- 72 Choose the drive letter according to the SCSI/ATAPI setting
- 73 Filename template
- 74 Increase LUN in batchmode
- 75 Increase SCSI-ID in batchmode
- 76 Enable batchmode
- 77 Select the driveletter to start with batchmode
- 78 # of drives to work on
- 79 Enter a comma separated tracklist
- 80 Compress after ripping all tracks
- 81 Enter a path for the lyrics files
- 82 CDDB batch query for prepared CD-information
- 83 Save CD information for later batch query
- 84 Retrieve lyrics from www.lyrics.ch
- 85 Write the lyrics to the file
- 86 Start playing the ripped CD when finish
- 87 Retrieve batch mode info from external file CDCOPY.DES
- 88 Use L3Codec when generating MP3 format
- 89 Normalize file after ripping to x%
- 90 Enter the level to which the file should be normalized
- 91 Normalize only when level < x%
- 92 Normalize only when level > x %
- 93 Keep leading x seconds of silence
- 94 Keep trailing x seconds of silence
- 95 Use TOMPG to produce MP3 format
- 96 Choose the channel mode - Joint stereo highest compression
- 97 Choose the bitrate for compression
- 98 Choose the # of stereo bands for joint stereo channel mode
- 99 Choose a language
- 100 Save an excerption for later ripping
- 101 Replace space(s) by underscores
- 102 Start copying after disk change
- 103 Enter your username for proxy authorization
- 104 Enter the password for your proxyserver
- 105 Automatically generate batch entry for unknown CDs
- 106 Don't access the CDDB when in autorip mode
- 107 Write the MP3-ID tag in v2 format
- 108 Write the tracknumber to the MP3 ID tag
- 109 Adjust the startsector of every track for this value
- 110 Cut the last track to adjust wrong length calculation
- 111 Eject CD after autorip
- 112 Automatically save CDDB information in CDPLAYER.INI after a CDDB request
- 113 No drive spinning before reading
- 114 Drive spinning for every read session
- 115 Drive spinning for every track which should be read
- 116 Seconds to be read before hot reading starts
- 117 Adjust the endsector of every track for with value
- 118 Set the mode of mono file format you want
- 119 Shut down the system when work is done
- 120 Start a CDDB query if the local entry is not found
- 121 Set the priority for the compression process
- 122 Add addtional command line options for the compressor
- 123 Use the MP3/WAV/RA parameter to adjust the mono mode
- 124 Save file(s) in VQF-format
- 125 Save file(s) in Realaudio-format
- 126 Use the MP3/WAV/RA parameter to adjust the Realaudio format
- 127 Use BladeEnc for MP3 (MPEG 1 Layer 3) generation
- 128 Use the generic SCSI interface (only Windows-NT)
- 129 Suppress the "no media inserted" message
- 130 Suppress the "no entry found" message
- 131 Enable the logging
- 132 Enter the filename for the log file
- 133 Don't access CDDB when using batchmode
- 134 Calculate a checksum for the track during reading
- 135 Don't halt on error
- 136 Enter the port for the CDDB-protocol (Def. 888)
- 137 Enter the port for the HTTP-protocol (Def. 80)
- 138 Enter the port for the proxy-communication (Def. 80)
- 139 Use Plugger to produce MP3 format
- 140 Exclude the path for generated playlists
- 141 Replace slash(es) by dashes
- 142 Don't remove the WAV file after compression
- 143 Warn if the tag info exceeds the requested field lengths
- 144 Write addtitional lyrics file in LRC format
- 145 # of buffers for the reading tests
- 146 Enter the path for your VQF compressor
- 147 Multiple reading of the sectors
- 148 Use BladeEnc to produce MP3 format
- 149 Copy the compressed file to this path
- 150 Builds a generic name for later binding of the name and tag
- 151 Click here to visit this website
- 152 Click here to send an e-mail to me
- 153 Click here to download BladeEnc compressor
- 154 Select a file format
- 155 Click here to visit the CDCOPY homepage
- 156 Enter the name of the lyrics server (www.lyrics.ch or search lyrics.ch)
- 157 Choose the appropriate VQF encoding mode
- 158 Choose stereo/mono for the encoded file
- 159 Convert the file(s) in this path
- 160 Decompr., convert a path and all subdirectories
- 161 Choose the frequnecy for the mp3 compression with the l3codec
- 163 Choose the compression mode for QDesign Codec
- 164 Generate CDDB file from CD-Text information
-